2001 9200i speedo calibration

Discussion in 'International Forum' started by garymack53, Aug 21, 2013.

  1. garymack53

    garymack53 Bobtail Member

    Joined:
    Aug 21, 2013
    Messages:
    2
    Thanks Received:
    0
    Location:
    Tucson AZ
    0
    I changed tire/wheels from 22.5 to 24.5 and need to recalibrate speedo. Cant find instructions anywhere. Speedo has 2 8 contact dip switches, the pulses/miles is set by the first 8 positions of switch 1 and second 2 positions of switch 2. All switches are off, probably from factory. Lineset is A-2733P. Any way to recalibrate from these dipswitches?:biggrin_2557:
     
  2. Heavyd

    Heavyd Road Train Member

    Joined:
    Feb 4, 2009
    Messages:
    7,752
    Thanks Received:
    6,186
    0
    That is all calculated in the ECM. You need to go to a shop that can connect to whatever engine you have and change the settings. Usually pulses per mile, but they will know. Those dipswitches are for trucks with mechanical engines.
     
  3. garymack53

    garymack53 Bobtail Member

    Joined:
    Aug 21, 2013
    Messages:
    2
    Thanks Received:
    0
    Location:
    Tucson AZ
    0
    Thanks, that explains why all the dipswitches are off. DD III 12.7 L