D12 engine Need help. It cranks but does not start. looks like issue with the injector circuit. Codes in ecu 1 to 6 injectors. Mid128 sid1 fmi5. Plus the same mid128 and fmi5 plus sid1-6 code. What could it be? Help!
2005 Volvo with volvo engine wont start, Injectors 1-6 code mid128 sid1 fmi5
Discussion in 'Volvo Forum' started by Breathless, May 9, 2020.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Check wires on batteries ecm is not getting enough power to turn on injectors.
-
Where would I check that. Is it a pin on the ecm connector that powers the ecm?
-
Check the wires on top off batteries for corrosion. Not the big one the small ones.
-
I did check it. Its a red and a white wire. They have good power and not corroded
-
I have looked online and something called EMS2 comes up. Not sure what that is? Would you know which pin to check and connector for the + power for the injectors?
-
Check the engine management fuses in the cab there should be 2 of them.
-
Would they be in the fuse box or under the dash?
-
it would be in the fuse box make sure to check all fuses have power with ign on maybe some relay if messing up and making all kinds of problems for you.
-
Hello were you able to solve the problem ?? BeCause I have the same with my volvo
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.