2010 Cascadia, Clutch Safety Switch

Animosus · Feb 23, 2017

It's just to the left of the spring above the clutch.

If I remember I'll get a picture of it for you tomorrow.

Jarrods · Feb 23, 2017

Pull the four torx screws on the out side of the firewall. The reservoir is attached tp the pedal assembly. Once you remove the four screws you can pull the pedal out through the firewall

Izzymoe · Sep 12, 2017

OneTwentyOne said: ↑

Hey guys,

I am having intermittent issues starting my Cascadia. SYMPTOM: Intermittent start pushing in the clutch pedal, some days have to press harder. Have read in the forum of the clutch safety switch.

I have looked in the pedal area, but can not find the clutch safety switch. Can't find in the forum location, was wondering if anyone can help me out.

I went looking from the engine compartment and see 4-star screws that are holding a plate that holds the clutch reservoir and am wondering if I remove those bolts and pull out will I have access - can someone inform me if this is the route?

Before I go pulling the clutch pedal out through the engine compartment - are there certain issues I need to be aware of?

thanks,
Click to expand...

Izzymoe · Sep 12, 2017

Just take the 4 bolts off the dash panel
On the left side next to the steering column on about the clutch pedal.
Easy fix took me 30 min all you need is a regular allen wrench..

Log in or Sign up

Forums

Find Trucking Jobs

2010 Cascadia, Clutch Safety Switch

Animosus Medium Load Member

Trucking Jobs in 30 seconds

Wait, employers can't reach you!

Jarrods Bobtail Member

Izzymoe Bobtail Member

Izzymoe Bobtail Member

Trucking Jobs in 30 seconds

Wait, employers can't reach you!

Log in or Sign up

Useful Searches

Find Trucking Jobs

2010 Cascadia, Clutch Safety Switch

Animosus Medium Load Member

Wait, employers can't reach you!

Jarrods Bobtail Member

Izzymoe Bobtail Member

Izzymoe Bobtail Member

Wait, employers can't reach you!