Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

2010 International Pro Star can’t get fault codes! Help!!

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Tlog, Oct 6, 2017.

  1. Oct 6, 2017 #1
    Tlog

    Tlog Bobtail Member

    1
    0
    Oct 6, 2017
    0
    I have a 2010 Internatioanl Prostar with a Maxxforce 13.0 L6, the truck has been parked for a good while and i am trying to turn it on but when I turn the key I just here a click in the fuse box and down in Silenoid Starter but the engine does not turn, ive tried to get the fault codes by holding CRUISE ON and CRUISE RESUME but I get nothing can anybody explain as to why I am having these problems?
     
    Tlog, Oct 6, 2017
    Tlog, Oct 6, 2017
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oct 6, 2017 #2
    Heavyd

    Heavyd Road Train Member

    7,767
    6,204
    Feb 4, 2009
    0
    Prostars can't do that.
     
    Heavyd, Oct 6, 2017
    Heavyd, Oct 6, 2017
    #2
    Shaggy76 Thanks this.
  4. Oct 7, 2017 #3
    Txdriver77

    Txdriver77 Medium Load Member

    365
    26,641
    Sep 7, 2016
    Texas
    0
    the faultcode is listed on the door in shiny letters- prostar.
     
    Txdriver77, Oct 7, 2017
    Txdriver77, Oct 7, 2017
    #3
    94yj and Heavyd Thank this.
  5. Oct 10, 2017 #4
    dustinbrock

    dustinbrock Road Train Member

    1,308
    901
    Apr 19, 2012
    North Battleford, SK
    0
    There won't be a code for that. Your starter may just be seized up anlittle from sitting. Take a hammer and tap on the starter while someone tried to start it.
     
    dustinbrock, Oct 10, 2017
    dustinbrock, Oct 10, 2017
    #4
  7. Oct 11, 2017 #5
    Heavyd

    Heavyd Road Train Member

    7,767
    6,204
    Feb 4, 2009
    0
    Probably just needs a boost.
     
    Heavyd, Oct 11, 2017
    Heavyd, Oct 11, 2017
    #5
    94yj Thanks this.
  8. Oct 21, 2017 #6
    Inderjit

    Inderjit Heavy Load Member

    723
    708
    Sep 17, 2017
    0
    The starter relay is grounded through the engine ECU. If the ECU is not powering up the engine will not crank. Check the engine power harness fuses in the battery box and make sure the harness doesn't have a broken wire or corroded connection both power and ground.

    Inderjit
     
    Inderjit, Oct 21, 2017
    Inderjit, Oct 21, 2017
    #6
  9. Oct 21, 2017 #7
    Heavyd

    Heavyd Road Train Member

    7,767
    6,204
    Feb 4, 2009
    0
    That's not true.
     
    Heavyd, Oct 21, 2017
    Heavyd, Oct 21, 2017
    #7
  10. Oct 22, 2017 #8
    Inderjit

    Inderjit Heavy Load Member

    723
    708
    Sep 17, 2017
    0
    You are right.
    I checked the wiring diagram and the relay does not ground through the ECU.

    Inderjit
     
    Inderjit, Oct 22, 2017
    Inderjit, Oct 22, 2017
    #8
    94yj Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.