2012 pete paccar mx13 epa 10 low power

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Transportauto, Apr 10, 2022.

  1. spsauerland

    spsauerland Road Train Member

    4,296
    10,887
    May 31, 2010
    West Harrison, In
    0
    This is other charts I wanted to add, but can't remember if EPA 10 had it. Fuel limit status. KIMG0099.JPG KIMG0100~2.JPG
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Transportauto

    Transportauto Light Load Member

    100
    34
    Apr 10, 2022
    0
    Mg/stroke are you you referring to the 248.8 fuel rate in the picture I posted
     

    Attached Files:

  4. spsauerland

    spsauerland Road Train Member

    4,296
    10,887
    May 31, 2010
    West Harrison, In
    0
    Yes, then see if you can monitor that with your Texa.
     
  5. Transportauto

    Transportauto Light Load Member

    100
    34
    Apr 10, 2022
    0
    OK so I pulled the fuel control valve and it was OK but went ahead and replaced it since it was in hand.
    Same with the boost sensor. As for driving while monitoring the Injected fuel quantity under full load it showes 2.36 or so if I let off just a little and back on I sometimes will get 3.8? And seen as high as 4.4? Pulls great there. What should that reading be? I uploaded pics of the Engine sticker as well as a few screen shots of texa with the engine off (1 hour off the road)
     

    Attached Files:

  6. Transportauto

    Transportauto Light Load Member

    100
    34
    Apr 10, 2022
    0
    I get 2.48 most of the time. Slight let off and back on I get 3.?? And seen 4.??
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.