I had my A/C charged last night. I've got cold air in the sleeper but it's blowing hot in the cab. Anyone experienced this before or know what's wrong?
2013 587 Peterbilt A/C problem
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Franola, Jul 11, 2017.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Actuators where are they located
-
Expansion valve is bad or orafice tube is plugged, need to go to the shop, get it flushed and new parts put in.
-
Actuators are usually the cause on this.
Even on cars. They are located usually below the cabin under the steering wheel. -
I would go with expansion valve , clean lines (flush)
-
There will be an actuator controlling the hot/cold air to the cab. More then likely its stuck on hot. Depends what year of 387 but it should be accessed on the firewall as it is attached to the heater box.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.