2016 USED COLUMBIA GLIDER WITH S 60 SERIES

Discussion in 'Ask An Owner Operator' started by martin2722, May 5, 2018.

  1. hasrem

    hasrem Bobtail Member

    Joined:
    Apr 16, 2018
    Messages:
    47
    Thanks Received:
    8
    0
    sorry i don't recall if you had already mentioned this in the thread, but are you doing your own Authority or leasing with a company? Which company if you decided that route?
     
  2. daf105paccar

    daf105paccar Road Train Member

    Joined:
    Apr 15, 2012
    Messages:
    6,564
    Thanks Received:
    7,293
    0
    I advice you still do those 4 oilsamples.
    Motor,gearbox and the 2 drives.
     
    martin2722 and Cheezy_smile Thank this.
  3. martin2722

    martin2722 Light Load Member

    Joined:
    Feb 4, 2017
    Messages:
    67
    Thanks Received:
    34
    0
    I will and get back to you , thanks
     
    daf105paccar Thanks this.
  4. martin2722

    martin2722 Light Load Member

    Joined:
    Feb 4, 2017
    Messages:
    67
    Thanks Received:
    34
    0
    I'm leased to a company called Djuric Trucking ot of Hammond, IN
     
  5. martin2722

    martin2722 Light Load Member

    Joined:
    Feb 4, 2017
    Messages:
    67
    Thanks Received:
    34
    0
    Truck is pulling good but the only problem that i have is that the A/C would stop blowing cold air after 10,15 min. I would have to turn off the air for 10min and turn on again for it to start blowing cold air for another 5-10min. The mechanic check the wires they were ok, compressor ok. Maybe someone can help?
     
  6. spyder7723

    spyder7723 Road Train Member

    Joined:
    Mar 31, 2013
    Messages:
    15,471
    Thanks Received:
    25,075
    Location:
    sarasota, fl
    0
    The evaporator is freezing up. First thing to do is make sure the drain tube isn't plugged up. If that's not it, then you ate gonna have to pull the dash apart and clean it out with a mild detergent and soft brush.
     
    jsnell and martin2722 Thank this.
  7. RERM

    RERM Road Train Member

    Joined:
    Dec 13, 2012
    Messages:
    1,683
    Thanks Received:
    1,125
    Location:
    Chicago, IL
    0

    Pulling cans??? with a 72K note.....Good Luck!
     
  8. martin2722

    martin2722 Light Load Member

    Joined:
    Feb 4, 2017
    Messages:
    67
    Thanks Received:
    34
    0
    Why not? I'm not dragging rail chassis ever
     
  9. martin2722

    martin2722 Light Load Member

    Joined:
    Feb 4, 2017
    Messages:
    67
    Thanks Received:
    34
    0
    I took everything apart and cleaned it with hand sanitizer. Works like new, thanks!
     
  10. martin2722

    martin2722 Light Load Member

    Joined:
    Feb 4, 2017
    Messages:
    67
    Thanks Received:
    34
    0
    I did check all 4 and changed the gear and drives fluid. Everything turned out good