2016 Volvo 780 can not start regen.

Discussion in 'Volvo Forum' started by Vova, Jun 11, 2018.

  1. Vova

    Vova Bobtail Member

    5
    0
    Jun 11, 2018
    0
    Hi guys, my 2016 Volvo doesn’t want to do regeneration. It says conditions not met check ATS status and shows me the code sa 16 dtc p24f600. Any ideas what is wrong? Thanks in advance for your help.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. mover man

    mover man Road Train Member

    1,698
    1,801
    Feb 21, 2010
    0
    Google the code. Why are you trying to do a regen? When you check you ats status how high us your soot?
     
  4. Vova

    Vova Bobtail Member

    5
    0
    Jun 11, 2018
    0
    Check engine lights was appeared on dashboard with that code. Mechanic said I cannot drive truck Because when it needs regen it not going to able to do it because of that code.
     
  5. mover man

    mover man Road Train Member

    1,698
    1,801
    Feb 21, 2010
    0
    http://www.truck.ru/downloads/volvo.pdf. Well I'm no mechanic so i would listen to him before me. However if the "engine in derate 5 mph" message isn't showing I'd drive it (at least to a volvo shop)
     
  6. Johny41

    Johny41 Road Train Member

    1,192
    1,020
    Feb 10, 2011
    Ontario, Canada
    0
    I unplugged the speed sensor a couple of times when was derated with emissions problems, and kept moving to shop, saved $$$ on towing, go to app store download a speed app on your phone , there are dozens , all work, so you can watch your speed via phone gps, is very accurate. But this may not work with i-shift, i have 13 manual, the speed sensor is located at rear end of transmission .
     
  7. BoostedTeg

    BoostedTeg Road Train Member

    1,775
    3,113
    Jun 2, 2008
    Boise ID
    0
    Isn’t the truck still under factory warranty
     
    KB3MMX and Socal Xpress Thank this.
  8. Suki

    Suki Bobtail Member

    8
    0
    Jun 24, 2018
    0
     
  9. Suki

    Suki Bobtail Member

    8
    0
    Jun 24, 2018
    0
    Hey vova I have same code on my truck what mean this code , did you fix your truck thank you
     
  10. Vova

    Vova Bobtail Member

    5
    0
    Jun 11, 2018
    0
    Hi Suki, I replaced all this parts and code gone, and it still doesn’t want to do forced regen.
    1 - replace aftertreatment fuel shutoff valve
    2 - replace aftertreatment fuel injector
    3 - replace the hose/pipe between aftertreatment fuel shutoff valve and aftertreatment fuel injector.
     
  11. mover man

    mover man Road Train Member

    1,698
    1,801
    Feb 21, 2010
    0
    Go thru your menu find after treatment. Go to that then scroll down to soot level. It will not let you do a parked regen, if it's not needed. Soot has to be appx a little past the half way mark. (If you check level several times a day. You will see it goes up and down, because truck burning fee and regen going down the road) The only 2 ways I have found to FORCE a regen are. Take it to shop they can hook comp up and do a 2 hour forced regen. Or start truck and do not shut it off for 1-2 days and dont increase idle speed.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.