Thanks for the info. On a side note, I've read several threads on here about Mr Haney and his ECM tuning. I see that he's not on here anymore, is there anyone else who is good for reflashing ECMs?
3406E Camshaft Question
Discussion in 'Trucks [ Eighteen Wheelers ]' started by Fordworth, Feb 3, 2015.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Thanks guys. I don't have enough posts to pm yet, but the lead one of you gave me on the unmentionable is appreciated. Bigguns, I'll let you know if I need help making contact.
-
Hello everyone
It’s my first post here and I can’t seem to figure out my question after extensive research.
I have low HP 3406e(2ws08414) with a 1439153 camshaft. One of my injector lobes is starting to get worn down. I ordered a replacement camshaft through YNG LLC. They sent me 1390538 camshaft which is rated for the higher hp arrangements. They said that they bet their left nut on it that it will work with no problems. On the contrary the cat dealer say that these cams don’t interchange, but they don’t have info on how they differ . What will happen if I put the
1390538 into 1439153 engine arrangement? -
UpperDevker I cannot help you with info about the cam differences but you might get a better response if you start a new thread in one of the two forums under "the garage " caption. A lot of the times if you "piggyback" on a existing thread you wont get as many views and less chance at help.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2