Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

53’ Flat (not step!) center point

Discussion in 'Flatbed Trucking Forum' started by Jmesser96, Apr 24, 2018.

  1. Apr 24, 2018 #1
    Jmesser96

    Jmesser96 Bobtail Member

    1
    0
    Apr 24, 2018
    0
    Hey guys, I’ve only ever loaded single coils or other single piece loads on a 48’.
    Currently have a 10’2” spread on a Reitnouer 53’ flat. My fifth wheel doesn’t slide and I can run
    34 on my drives and stay 11500-11750 on my steers. Can you guys help me find the center point for weight distribution?
     
    Jmesser96, Apr 24, 2018
    Jmesser96, Apr 24, 2018
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 24, 2018 #2
    Tug Toy

    Tug Toy Road Train Member

    6,787
    70,669
    Jul 4, 2015
    Corn field
    0
    Depends where the trailer axles are. Our 53 Reitnouer trailers I put coils about 12 to 16 inches in front of the turn signal lite. I think the rear axle is 24” ahead of a set rear axle setting. Our trailers have a 24” kingpin.

    To find the actual load center measure from the king tin to the center of the 2 trailer axles. The half point is the load center. Then you can adjust from there.
     
    Tug Toy, Apr 24, 2018
    Tug Toy, Apr 24, 2018
    #2
    Bud A. and Opendeck Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.