Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

99 International shutdown problems

Discussion in 'International Forum' started by petersonstrucking, Jan 10, 2012.

  1. Jan 10, 2012 #1
    petersonstrucking

    petersonstrucking Bobtail Member

    2
    0
    Jan 10, 2012
    Wisconsin
    0
    Hi All when we have been having a problem with the truck going in to shutdown mode. It will trun on the fan and light then go into shutdown. It will not start beeping like normal in a shutdown mode we think that it could be the Tps sensor dose that sound right to anyone.
     
    petersonstrucking, Jan 10, 2012
    petersonstrucking, Jan 10, 2012
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jan 10, 2012 #2
    bender

    bender Road Train Member

    2,105
    1,360
    Jul 20, 2010
    Don't Kid Yourself
    0
    Would be best to scan for trouble codes and monitor live data to properly access the problem.
     
    bender, Jan 10, 2012
    bender, Jan 10, 2012
    #2
  4. Jan 10, 2012 #3
    Flightline

    Flightline Road Train Member

    2,345
    1,166
    Oct 1, 2011
    Almost There
    0
    Have you checked the anitfreeze level?
    Also good to check and clean all ground connections.
     
    Flightline, Jan 10, 2012
    Flightline, Jan 10, 2012
    #3
  5. Jan 10, 2012 #4
    Heavyd

    Heavyd Road Train Member

    7,811
    6,264
    Feb 4, 2009
    0
    Fan and check engine light coming on is probably the ECM seeing too high of coolant temp, too low of coolant level or too high oil temp. You engine is programmed for shutdown protection. The coolant temp gauge is feed from the ECM, so if your temp shows normal there it is either coolant level or oil temp. If you have an oil temp gauge it has it's own sensor and the ECM reads oil temp from a different one, so you may still have high oil temp. Until you confirm the problem is electrical or a sensor treat your engine like it may have a mechanical issue. You will have to get the code to see what is going on.
     
    Heavyd, Jan 10, 2012
    Heavyd, Jan 10, 2012
    #4
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.