hello
I am having issues with my 99 Pete. Truck has no jakes or cruise but the cruise works if you push on the brake pedal pretty hard. As soon as you let off the cruise stops. Obviously can’t get the jakes to work that way as you have to jam it pretty far. Was told by previous owner they both went out together. Tried the pull the clutch out to see if it was the return spring to no avail. Any ideas?
99 Peterbilt jakes and cruise suddenly went out
Discussion in 'Trucks [ Eighteen Wheelers ]' started by Bennynags, May 20, 2019.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Just a little bit of dirt down by that pedal can get you.
-
Came to suggest just what was already said: clutch.
Pull the pedal out while driving with the jake on and see if it comes on. -
^^^^^^^^^^^^ this is a good way to see if its adjusted correctly but if the switch and or wiring is at fault this does nothing.
pushbroom Thanks this. -
Correct.
But that’s where I’d start anyway, if only just to rule out the simple mechanical side of it.swaan Thanks this. -
Brake Pedal Switch
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.