About those straps for car tire securement to a stepdeck

You can buy them, but it's much easier to go to TSC and buy the 2" ratchet straps with the J-hooks on the end. That's what I've done for years and they are usually on sale for $9.99. The straps are tagged and rates for 3,333 lbs each.

heres a link to a place you can buy them tho....

http://www.uscargocontrol.com/Towin...ar-Tie-Downs?gclid=CK2V4Jq7x7MCFQGFnQodrg4AOQ

and going y the tire size, your hauling a Corvette Z06

 

You can just use regular two inch straps. Hook the hook in the rail in front of the tire, then take strap to the rear of the tire, around the inside towards the top, and back out around the front and down to the rear of the tire at the rail. Hopefully I explained this right, it makes an x with the strap on the outside.

 

why not just cross some chains from the frame/suspension in the front and rear and save yourself some $$$?

 

Going by the tire size, it's either a Z06 or maybe a Porsche/Ferrari. They have a valance panel built under them to help with aerodynamics at high speeds. Not as easy to hook down as you might think.

 

Logan, there's nothing to safely hook to under there, except the tie-down holes, which only take carhauler hooks. Lots of aluminum and composites which don't much care for contact with steel chain.

I'm wondering how you'll get the ramps shallow enough to load it?

 

Spend $50 and have a rollback come load it onto the deck for ya. Done that before

 

I've got "lasso" straps they're 12 ft load you wrap them around the tire and rim I can take a picture If you'd like.....I love them

 

I've wanted a set of those since I've seen them in your truck. Please share where u got them...