Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Anyone have instruction on how to replace waterpump

Discussion in 'Freightliner Forum' started by SimD, Dec 25, 2012.

  1. Dec 25, 2012 #1
    SimD

    SimD Light Load Member

    148
    30
    Dec 23, 2012
    dallas, tx
    0
    I got a 07 columbia with c15 acert waterpump leaks when the truck is off n cold. I use to work on cars before I started driving a truck, so I don't think it will that hard of a job. I just need instruction on how to remove and install the waterpump and any kind of tips you guys have, also going to replace the t-sats. And thank you guys in advance.
     
    SimD, Dec 25, 2012
    SimD, Dec 25, 2012
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Dec 25, 2012 #2
    dirtroadchild

    dirtroadchild Light Load Member

    92
    23
    Aug 12, 2011
    memphis tn
    0
    cat water pumps are not really bad just drain all coolant in big pan loosen the hoses and remove the bolts take it off! and thermostats replace them and gaskets and put all back together and fill with good coolant try ext life the red is good no additives needed!!! check all bolts and hoses they are tight !!
     
    dirtroadchild, Dec 25, 2012
    dirtroadchild, Dec 25, 2012
    #2
  4. Dec 25, 2012 #3
    SimD

    SimD Light Load Member

    148
    30
    Dec 23, 2012
    dallas, tx
    0
    Do you know the instructions for the water pump removal?
     
    SimD, Dec 25, 2012
    SimD, Dec 25, 2012
    #3
  5. Dec 25, 2012 #4
    1badz28

    1badz28 Road Train Member

    1,571
    324
    Dec 7, 2008
    savannah georgia
    0
    The ninstructions are as follows 1. Start unbolting stuff 2. Remember where it all went.
     
    1badz28, Dec 25, 2012
    1badz28, Dec 25, 2012
    #4
    Kendall427 Thanks this.
  7. Dec 25, 2012 #5
    SimD

    SimD Light Load Member

    148
    30
    Dec 23, 2012
    dallas, tx
    0
    Okay wise guy, I don't understand people if you can't be a help to someone why make smarta** remark
     
    SimD, Dec 25, 2012
    SimD, Dec 25, 2012
    #5
  8. Dec 25, 2012 #6
    McDaniel Trucking

    McDaniel Trucking Light Load Member

    60
    12
    Dec 2, 2012
    Lisbon Falls Maine
    0
    I did the pump on my S60 and all it is 2 large hoses 2 small hoses and 4 bolts. Hes not trying to be a smarta$$ he letting you know it is very easy to do and the way he explaind it is the same way I did mine in the driveway in a few hours.
     
    McDaniel Trucking, Dec 25, 2012
    McDaniel Trucking, Dec 25, 2012
    #6
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.