I'm installing an older tripac around. 2006 . I'm looking for someone with the same that don't care to look in there control box and tell me where 5 wires go . The first is 7x , it's a jumper one end goes on 7x the other I don't know about . I also need to know the position of the 4 wires on the reset switch . Thanks in advance
Anyone with a thermoking tri-PAC help please, wiring placement
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by RV transporter, Sep 22, 2018.
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Nobody?
-
Looks to be same board i have,if I have time tomorrow I’ll see if I can help.
-
Not going to be any help with 7x wire. On this one 7x has two wires neither one is a jumper,they both go out to wiring harness. One label “fht” the other no markings.
RV transporter Thanks this. -
For the reset switch. One side has 8d to front leg 8x to back other side has 20 to front leg 8 to back
RV transporter Thanks this. -
-
On the pic you posted,8d would be on the left,20 on the right.
RV transporter Thanks this. -
Maybe someone else will have the same wiring setup as me . 7x on mine is a jumper , I don't have any other wires or post marked 7x .
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.