Ask a Peterbilt Dealer!

Sorry I have fat fingers! Vin is 861723.

 

MXS 08374 475 HP/1850 LB/FT
RTLO18918B
Dana DS/ RS40 3.55 ratio on Flex Air

 

Thanks for the information.

 

Hello looking for a schematic and information on the undercab clutch linkage pivot point on my 379, seems the aluminum channel the pivot point swings on is worn causing too much play to get a proper linkage adjustment, wondering if there is a replacement part for this or is it something that has to be fabricated, vin is 549402

 

Here is a diagram. The channel looks to be p/n 06-01086 #7 in the picture.
Usually the short linkage rod or the arms/pins and bushing wear out before the channel does.

 

Real fun to get to project. Best time to do it is @ clutch time. Do yourself a favor and replace the big heim joints while you are there.

 

I think the holes in the channel are actually worn/stretched out, from what I can see anyway. It has the remote lube and I can see the grease line move back and forth when I have someone move the clutch pedal, is that channel an available part?

 

Best ask your local dealer. I am a mechanic. No idea on part change ups, price, or availability. I just pull wrenches.

 

Ok, thanks for the info anyway

 

All prices from petetruckstore.com. Can call your local dealer.
#7 Bracket is P/N 06-01086 $111.59
#4 Pivot shafts P/N 06-01179 $38.22 each
#8 and #9 Bronze Bearings in Pivots P/N 06-01084 $6.58 each