Blindspot window passenger door

Discussion in 'Kenworth Forum' started by nb629, Mar 5, 2014.

  1. nb629

    nb629 Light Load Member

    213
    245
    Aug 21, 2012
    0
    I drive a 2005 W900. There is a rubber seal on the Interior side of the passenger side door around the blind spot window near the floor. This seal has a pull tab on it . I am guessing it is to remove the inner glass so that you can clean the inside of the outer glass. Has anyone done this in there truck? I messed with it a little but the glass didnt come out easy like I thought it would. It looks like I'll have to pry it a little but haven"t yet.Any advice would be greatly appreciated.
     
    Last edited: Mar 6, 2014
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Dirty-Low-Walker

    Dirty-Low-Walker Medium Load Member

    359
    543
    Dec 17, 2013
    0
    I was wondering the same thing, surprised you haven't had an answer yet.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.