Could a person theoretically clean the egr cooler by hooking a gas powered leaf blower to the outlet side of the cooler, remove the hot pipe and just blow that soot backwards right out the inlet side of the cooler? Typically on my truck the inlet face of the coolant coils get clogged. So I wonder if this would work.
Blowing out EGR cooler with a leaf blower?
Discussion in 'Volvo Forum' started by Amram, Mar 26, 2019.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Nope it’s stuck there good .. you gotta remember egr is under higher boost than what your blower makes
-
Darn
-
Why not just toss the clogged pipe and drop a nice new one in?
-
Just get the whole system cleaned out
-
Wonder how much that costs.
-
NAPA used to sell this solvent called hydrozone, for cleaning egr coolers.What this guy does with the egr removed, can be done on the truck, avoid the remove/ instalation hassles , just two hoses at each end, a bucket and a pump to circulate the cleaning liquid through egr cooler. I understand the soot plugging egr cooler is mixed with oil that makes it sticky and this solvents or degreaser dissolve oil. I watched another video, some guys use "Purple Power degreaser " works well, but have to rinse it well after, both this chemicals can chemically break down the motor oil . Power washer should do it also.
Last edited: Mar 26, 2019
-
little cat 500 and Brandt Thank this.
-
QUALITYTRUCK and magoo68 Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.