Heat won't hurt that leaf spring one bit. It will pop that air bag. I cut them out all the time. Put something around the airbags to keep heat off it. Welding blanket or sheet metal
Broken airbag bolts stuck in front drive axle leaf spring
Discussion in 'Peterbilt Forum' started by Gwedo85, Sep 23, 2020.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Like I said earlier put your flame to the bolt not to the spring.
Maybe you can get it out with MAPP gas but if you use oxygen and acetylene and you heat that Bolt from the bottom and you heat it from the top the heat will transfer to the center of the bolt and eliminate that rust and you'll be able to knock it out.
Heating it that way will not bother the spring. -
Get some decent drill bits, not that Harbor Freight crap, and start a drillin',,,lots of oil too,,,
boneebone Thanks this. -
You could try air chisel to pop it out but likely heat then air chisel. I removed all rivets out of truck frame this way, was very quick.
-
Cut air bag bellows apart with box knife and drive the stud out from top.
QUALITYTRUCK and 062 Thank this. -
spsauerland Thanks this.
-
201 and QUALITYTRUCK Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2