bulkheads

Discussion in 'Ask An Owner Operator' started by Mr. PlumCrazy, Jul 15, 2013.

  1. Mr. PlumCrazy

    Mr. PlumCrazy Road Train Member

    1,341
    606
    Jul 30, 2009
    Lexington NC
    0
    Where is a good place to get one tired of dealing with this styrofoam I haul a lot of loads that wont even come half way back in the trailer and these save fuel not to include I can precool 10' of trailer to -10 in a few min. but the ones I have seen online run around $500 or so. At that price I will just keep getting styrofoam from shippers
     
    mp4694330 Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Oscar the KW

    Oscar the KW Going Tarpless

    12,246
    28,114
    May 19, 2011
    0
    mp4694330 and Mr. PlumCrazy Thank this.
  4. pullingtrucker

    pullingtrucker Road Train Member

    1,185
    598
    Dec 21, 2008
    Fostoria, Ohio
    0
    http://randallmfg.com/

    http://fgproducts.com/

    Both companies make great products. I currently use a older FG "Tough Boy" bulkhead that works good, but is showing its years of use. My next one will probably be a Randall unit. I highly suggest getting a heavier solid one instead of the light weight options both companies sell. The light weight ones won't insulate as well when there is a drastic temp difference. Also I would suggest having the factory install a vent on each panel in the top near the center of the trailer. Even if you never use a vent now, it may come in handy in the future.
     
    Mr. PlumCrazy and mp4694330 Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.