c-15 acert

Discussion in 'Trucks [ Eighteen Wheelers ]' started by matty, Jul 22, 2010.

  1. matty

    matty Bobtail Member

    3
    0
    Jul 22, 2010
    las vegas nevada
    0
    have a 2006 kw with a acert c-15 st4 valve on top of compressor keeps venting when turbos are boosting, have changed everything in air system and still does it, anyone else had this problem?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. country29

    country29 Medium Load Member

    518
    157
    Feb 27, 2010
    Arkansas
    0
    cant say as I heard of it only doing it when turbos boosting before. you say changed everything in the air system, did you change the unloader valve in the top of the compressor?
     
    matty Thanks this.
  4. pullingtrucker

    pullingtrucker Road Train Member

    1,185
    598
    Dec 21, 2008
    Fostoria, Ohio
    0
    It would either be the unloader valve acting up (ACERTs are known for coking up the unloader valves) or the reed valve down in the air box. The air box is mounted down on the driverside of the block, right in front of the secondary filter housing.
     
    matty Thanks this.
  5. rollinsmoke

    rollinsmoke Light Load Member

    62
    9
    Dec 23, 2008
    0
    I'v seen the unloader do that many times. O-rings go bad and leak air past so it wont move the valve to unload the compressor
     
    matty Thanks this.
  6. mark2842

    mark2842 Light Load Member

    104
    15
    Nov 10, 2007
    Lawrenceville,Ga
    0
    I had to replace my unloader valve on my 05. There is a updated version available.
     
    matty Thanks this.
  7. Izzyloco

    Izzyloco Light Load Member

    105
    8
    Jan 21, 2010
    New London,WI
    0
    I'm having the same prob just changed out uloaders and it still doing it. Ive been chasing it for a while now and everyone thought I was crazy when I would tell them I was loseing boost. Dose your purge valve keep going off mine leaks out of the safty valve on the dryer and it's really loud on a pull I lose about 5psi of boost. I've tried a new dryer, gov, unloaders, safety valve. Hope this helps please keep us undated
     
    matty Thanks this.
  8. matty

    matty Bobtail Member

    3
    0
    Jul 22, 2010
    las vegas nevada
    0
    changed everything you have changed also, our trucks are blowing out of the st4 valve on compressor only, did change the high side turbo on one truck, and it seems to do it alot less now, had checked the waste gate and it wasnt working, but cat doesnt sell just the waste gate, 2nd truck waste gate doesnt open till its at 45 inch pounds of vac but waste gate is stamped with 25 cant see spending the money on another turbo just to replace one with a bad waste gate
     
  9. matty

    matty Bobtail Member

    3
    0
    Jul 22, 2010
    las vegas nevada
    0
    just changed out air compressor and now only will blow air out of st4 valve when pulling loaded 9axle up a grade runs perfect with empty trailer
     
  10. blacklabel

    blacklabel Heavy Load Member

    870
    1,268
    Nov 6, 2011
    MO
    0
    Anyone find the problem?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.