Can I replace just the Oring in this?
Discussion in 'Trucks [ Eighteen Wheelers ]' started by BlackThought, Oct 19, 2018.
Page 1 of 2
-
Attached Files:
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
-
That's a brass fitting, just take a needle nose pliers and pull the brass quick connect off.
Inside you will find a o-ring, take a small L shaped metal pick and take it out.
Go to your local auto, hardware or hydraulic parts supply store to match the original o-ring.
Install the new o-ring by inserting it carefully back in until it is seated at the bottom of the fitting.
Re-install the quick connect back in and you'll be good to go.Hulld and BlackThought Thank this. -
Don't know if the color means anything. -
Air line o-rings are usually black or blue colored, but you should be fine using green.Last edited: Oct 20, 2018
Hulld and BlackThought Thank this. -
Also harbor freight carriers o ring assortments of black, green and brown
-
Just seal it up with some JB weld!
Yeehaww! -
Replaced the ring. All is well. 7 bucks for a little kit with various sizes. Vs 20 for a new fitting
boneebone Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2