Can someone help with these codes.

Hi, Got a warn engine light on and reading 2 faults this is what my dash says after i hold the dash button down

092:s01 128fo1 pid111_a

some of the 0 might be o's

I googled and only found one thing about coolant sensor for pid 111

any one have any ideas. Have a 05 cummins isx egr no dpf.

 

THANK YOU pablo-ua, Ok heres the problem. i looked by the resiviour and found a pinhole size leak on the resivour itself right below the add window. I let the engine cool while i went into meijer and bought the high temp epoxy and tried to plug it. I then added about 1 2/3 gallon of coolant and the light went off and no fualts. went on my way and about 10 mins later the light came back on same code. so pull back off to rest area and pinhole is now worse lol and coolant is below the add window again.

any idea how to patch this pinhole? im kinda jamed up now.

 

Very small. literally the size of a pinhead. i imagine when it is hot it expands but cant plug while hot becuase of leaking.

 

do you think jb weld would be better than the red epoxy? I could try and wrap the whole thing with duct tape.

 

International 9400i