I have a 03 kenworth t800 that has a c12 in it and we are putting a 3406e that I bought from a salvaged 2000 sterling I know the motor mounts will need to be changed along with some other things but I was just wondering if anyone has done this before that can give me some insight on what im getting myself into. the c12 is already pulled and I have the engines side by side. thanks
cat c12 3406e engine swap
Discussion in 'Trucks [ Eighteen Wheelers ]' started by CCC, Mar 15, 2014.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
See if you can get the right wiring harness from KW. Besides that, it would just be figuring out all the plumbing and fan.
-
It probably will but I would check and make sure the tranny and clutch will work with the bigger engine
Oxbow Thanks this. -
Why not swap in a different c12? If tuned they pull amazing!
-
The biggest thing is the computer is your a 70 pin or 40 pin and the same for that e model would you be interested in selling the C12
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.