It's what I do, but think I need three nuts))) I can't lose the stud and worry broke a stud
Cat c15 oil leak from behind fan mount?????
Discussion in 'Trucks [ Eighteen Wheelers ]' started by AlexCarHauler, Aug 4, 2014.
Page 2 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Stud shouldn't be that tight. If you get scared and can't get it out clean the stud up as much as you can and use black silicon around the stud. I wouldn't fill the hole with it then install stud. Stud first then silicon. I even used a small o ring on the stud and silicon. Easy fix. There is no way dried silicon will ever get out of the oil pan if the screen is where it's suppose to be on the suction tube.
AlexCarHauler Thanks this. -
-
Try the Oring idea. A size or 2 smaller than the stud will stretch and will be small enough to not interfere with the fan hub
-
-
Don't forget the black silicon. That is the secret
-
-
SAR Thanks this.
-
-
Permatex black silicon is what I was talking about. That's good stuff
Adisiwaya Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 4