Clutch wont shift into gear

Push the range selector(dog) all the way down...

 

If you shifted into gear and released the clutch and didn't move...You have a tranny problem not a clutch problem.

 

Maybe someone stole his clutch and plate so theres no connection, or as ive seen before someone stole the driveline LOL. Goodluck figuring it out.

 

remove

the

jack

stands.......

 

Oh yea push the yellow&red knob in..... But your truck didn't stall???

 

I didn't know that the clutch is what I was shifting all this time. So when I press the pedal that's really the transmission I'm engaging? Huh...

 

He is Bosnian-American go easy on him.

 

I sugest bad splitter (if it is Volvo 12 st tranny, ore Fuller 13st/18st).

The mistake of this message is that there is no any info about truck, year, tranny, engine....

 

I know it sounds funny, but I had something similar happen recently on my old 2000 770. I pushed the clutch in and when I released it, the pedal came up but nothing happened. I could put it in and out of any gear I wanted, and the pedal was stuck solid at the top. I had to stomp 4 or 5 time quickly to shock it loose, before I could push it down again,then it worked fine