Con-Way Truckload Drivers: What's Your 20? (2014 edition)

Discussion in 'Con-Way' started by double yellow, Feb 18, 2014.

  1. paul_4lp

    paul_4lp Road Train Member

    3,859
    2,371
    Oct 21, 2010
    Fort Myers, FL
    0
    Robin never worked for shot ### Conway
     
    NotTheAverageTrucker and EtaN Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. EtaN

    EtaN Medium Load Member

    514
    379
    Sep 21, 2012
    Memphis, TN
    0
    How you hook up the CB in this truck? I r confuz
     
    NotTheAverageTrucker Thanks this.
  4. double yellow

    double yellow Road Train Member

    5,946
    10,066
    Aug 28, 2011
    State of Jefferson
    0
    Should be hookups in the overhead bin. Mine even had the 12v plug already wired in. There should also be a bs velcro strap to keep it from bouncing around


    Managed to relay in Taylor, but not even Maria could save me. Traded a load with 3 days & 300 miles remaining for one with 2 days & 200 miles. My patience is beginning to wear thin -- freight should have picked up weeks ago... Didn't even get 10,000 miles in March & I had to escalate to Ops supervisor to get paid layover on my last load despite sitting 64 hours straight because the computer kept denying it.
     
  5. EtaN

    EtaN Medium Load Member

    514
    379
    Sep 21, 2012
    Memphis, TN
    0
    I just got a green and white wire... Lol
     
  6. double yellow

    double yellow Road Train Member

    5,946
    10,066
    Aug 28, 2011
    State of Jefferson
    0
  7. EtaN

    EtaN Medium Load Member

    514
    379
    Sep 21, 2012
    Memphis, TN
    0
    The antenna cable is there. I know the green is hot and white is ground but it's not the standard cb hookup I'm used to its the antenna the extra speaker cable and green and white wire exposed.


    Here's a pic at what I'm working with 20140405_210502.jpg
     
    Last edited: Apr 5, 2014
  8. double yellow

    double yellow Road Train Member

    5,946
    10,066
    Aug 28, 2011
    State of Jefferson
    0
  9. EtaN

    EtaN Medium Load Member

    514
    379
    Sep 21, 2012
    Memphis, TN
    0
    I got the 3 pin power on my cb already. The red and black wires. Should I electrical tape it to it or how do I go about doing it? I'm used to the red and black screw hook ups.
     
  10. double yellow

    double yellow Road Train Member

    5,946
    10,066
    Aug 28, 2011
    State of Jefferson
    0
    Green to Red. White to black. You can just twist the wires & wrap in electrical tape, or use wire nuts, or butt connectors, or twist & solder & heat shrink, etc (that list is roughly in the order of increasing durability).
     
    EtaN Thanks this.
  11. EtaN

    EtaN Medium Load Member

    514
    379
    Sep 21, 2012
    Memphis, TN
    0
    10/4 that's what I thought how to do it. I just wasn't 100% sure. Didn't wanna do anything stupid. Now my CB is peaked to 80 Watts can Prostar handle it?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.