Confused by Flashers....

I had a Century that I had to put in a heavier amp capacity flasher when I switched trailers that had more lights. Yours may be weak from age, or have been replaced once with a lighter duty one. I can't remember what the spec was, but most places only sell the light duty ones.

 

If all your turn signals are LED lights, you can try a lighter duty (car) flasher, but first I'd just try a new standard one. A friend of mine had to go to a light duty flasher when he swithed to all LED lights in his Pete. Something to do with the LED's not using enough power to work the stock flasher.

 

Hi Gears: As they have said, i would try another flasher first......

 

Weird gears. We have a problem similar to yours our T600 can't take the rear leds on the stock center panel we have replaced the wires and sorry for hijacking your thread.

 

Are you saying that with the regular sealbeam lights the flasher works fine, then when you put the LED's in it doesn't?

 

Flasher and stop lights and just turned on do not work. If you use on regular light and another LED it's fine. But both led's will light up you will only see one small diode.

 

Well, if you put a regular light in and they work, its nothing in the wiring. Almost has to be the flasher.