Disconnecting things on International LT

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by me myself and I, May 15, 2024.

  1. me myself and I

    me myself and I Heavy Load Member

    719
    308
    Oct 5, 2009
    vernon hills,Il
    0
    Two things. Supply line to fan clutch solenoid. I'm guessing it's a quick connect , but I've never seen one like that.
    And EGR delta pressure sensor plug. It a X15, but different from IXS.
    How do I get them off
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Goodysnap

    Goodysnap Road Train Member

    3,542
    8,504
    Jul 12, 2017
    0
    Quick connect fittings can get stuck and frozen. Push in on the collar while pulling out on the nylon line. If it doesn’t come. Just cut the line flush at the fitting and replace the fitting with a new one of your choice either old school or new quick connect. Cut the line with a razor or utility knife to leave a clean straight edge for ease of reassembly.

    On the sensor….

    slide the red locking tab on the connector with a flat screw driver. Squeeze the release tab to remove the connector.New X15 may have a cover over the lock just pop it off with a screwdriver and the same old connector is under the cover.
     
    Last edited: May 15, 2024
    runningman0661 Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.