Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

(--) displays in cluster with fredomline.

Discussion in 'Volvo Forum' started by 05vnl670, Apr 28, 2013.

  1. Apr 28, 2013 #1
    05vnl670

    05vnl670 Light Load Member

    165
    60
    Feb 17, 2013
    0
    (--) some times appears in cluster but truck shifts gears no faults in tcm. When (--) are on cluster I'm not able to read out faults in transmission. It seams like poor connection somewhere Any known problems. .
     
    05vnl670, Apr 28, 2013
    05vnl670, Apr 28, 2013
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Apr 29, 2013 #2
    VisionLogistics

    VisionLogistics Road Train Member

    1,551
    978
    Dec 8, 2011
    Jellystone
    0
    Usually it means "No data communication / no power to transmission".

    I'd have it checked out soon. My team truck just did this 3 weeks ago, turned out to be a fried voltage doubler and brain. $6500 to repair just those two electronic bits, on a million miler, so I said naw, and had the shop convert and swap in a 13 spd. Fuller manual. Picking the truck up tomorrow.

    Gonna be about 11 grand or so with a reman 13, used flywheel, used pedal, linkage, new cross shaft, new clutch, few other things. Plus they fixed a leaky rear structure while the trans was off.

    Not a small job, but worth it to get a 13 manual in- cheaper in the long run. Truck has a rebuilt motor in it, otherwise I'd have scrapped her and bought another new-used.

    Good luck with yours.
     
    VisionLogistics, Apr 29, 2013
    VisionLogistics, Apr 29, 2013
    #2
  4. Apr 29, 2013 #3
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    what SM codes? what MID 130 codes? what about 12 to 24 Voltage converter? it is weak thing
     
    Pablo-UA, Apr 29, 2013
    Pablo-UA, Apr 29, 2013
    #3
  5. Apr 29, 2013 #4
    05vnl670

    05vnl670 Light Load Member

    165
    60
    Feb 17, 2013
    0
    No faults in any module. I'm checking on cluster for faults. I don't have vcads. The trans goes into gears and neutral but the display don't work at times. Im thinking its a poor connection to communication from cluster to trans module. When those lines appears on cluster I'm not able to check codes in transmission but I checks in all other modules.
     
    05vnl670, Apr 29, 2013
    05vnl670, Apr 29, 2013
    #4
  7. Apr 30, 2013 #5
    Pablo-UA

    Pablo-UA Road Train Member

    7,604
    1,642
    Oct 11, 2010
    Borispol, Ukraine
    0
    Really J1939 is used for cluster gear display. But dashboard use J1708 for diagnostics so I sugest bad wiring
     
    Pablo-UA, Apr 30, 2013
    Pablo-UA, Apr 30, 2013
    #5
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.