Electro-Voice 602T noise cancelling microphone

I found one for $10.00.




http://m.ebay.com/itm/201574402351

I have plenty. Figured I would share this link.

 

I can give you step by step wiring Instructions.
pin 1 shield
pin 2 audio
pin 3 transmit
pin 4 (cobras only) receive

 

The EV 602 series switch is always compatible with all modern radios including Cobra and Uniden and although the pj-068 plug uses 3 wires, a 4 pin plug and 4 wire cord can easily be added. Here is one from my personal stash opened up to show the switch.
(Unkeyed it makes contact for cobra receive
and keyed you can switch audio and transmit although I only switch transmit and leave the audio wire permanently connected on mine)


This one came with a 4 pin XLR

This microphone uses 3 wires and works fine with modern radios.
Pin 1 shield
pin 2 audio
pin 3 transmit
pin 4 empty


(Will not work with cobra or uniden.
This will work on exports only)

 

Did you end up buying it?

 

When you get it shoot me a p.m. and I'll send you my number because I'll have to guide you through the process over the phone but you'll need flux solder and a soldering gun and some wire strippers