Fuel gauge not reading either tank.

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Lakeshore67, Oct 30, 2023.

  1. Lakeshore67

    Lakeshore67 Bobtail Member

    4
    0
    Sep 2, 2023
    0
    [​IMG]Woke up to fuel gauge needle reading straight down, even though both tanks were about 3/4 full. Fueled later when I knew both were at 1/4 and took these pics. Switching tanks will still move the needle slightly, and I don't think both sending units would crap out at the same time, so it's either a bad gauge or a wiring issue. Anyone else had this problem?
    [​IMG]
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. PaulMinternational

    PaulMinternational Road Train Member

    1,108
    5,518
    Aug 23, 2022
    0
    I've had 2 issues that were easy to resove.
    One was what seemed like a constant misreading no matter the fuel level. For that one I took the unit out of the tank drained it and reinstalled after checking for broken wires. Seems it was just stuck and hadn't acted up since.
    Second issue was a no read with the needle pointing to E. Unplugged the connection closest the tanks and cleaned. Applied some fresh dielectric grease and again no more issues.

    Hope this is of some help
     
    aussiejosh Thanks this.
  4. Lakeshore67

    Lakeshore67 Bobtail Member

    4
    0
    Sep 2, 2023
    0
    Thanks. I'm hoping it's just a dirty connection, as it started giving the same 'zero' reading for both tanks at the same time.
     
  5. Opus

    Opus Road Train Member

    19,029
    117,695
    Dec 18, 2011
    South GA
    0
    Maybe you're out of gas?
     
  6. 062

    062 Road Train Member

    6,183
    33,354
    Oct 20, 2013
    0
    What truck?
    If you have multiplexed gauges,it could be the jumpers on the back of the gauges.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.