Hello,
I Need help!
I live in Qld/Brisbane and just purchased my own T401 with an M11 plus engine, that needs an inframe kit, Does anyone know were is the best place to go for parts? (I have already been to Cummins, Brown and Hurley & QLD diesel) so far the cheapest quote is $4,100.00 for the kit.
Owner Driver advice - also can someone PLEASE give me some sound advice on rates that I should be looking at (km rates and hourly rates) I don,t have a trailer just the prime mover (50Tgvm),
ANY advice will be greatly appreciated.
Regards DAve
Hi all I am new to the forum
Discussion in 'Australian Truckers Forum' started by AUSSIE DAVE, Mar 7, 2010.
Page 1 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Welcome to the forum, Dave! We have a few Aussies here and hopefully some will have answers for you. In the meantime, you may want to check our owner/operators board, http://www.thetruckersreport.com/truckingindustryforum/ask-an-owner-operator/, as well as our Eighteen Wheelers board, http://www.thetruckersreport.com/truckingindustryforum/trucks-eighteen-wheelers/.
Good luck... and we look forward to getting to know you!kickin chicken Thanks this. -
You certianly picked a bad time to move into O/O..
$4K for the kit sounds good, but what was the labour on it?
rates, as low as $50/ per hr, and per klms, start from $1.10...Ducks Thanks this. -
No labour, I will be installing the kit myself with a mate and diesel fitter, I will be doing 90% of the work.
ARe u in the US or OZ? -
im from kinglake, Vic.
-
Hi Dave, welcome to the site too, I`m further up the coast than you too.
-
how are the waters receding up there?
im waiting on it to calm down and the ground to firm up so i can get after a contract -
Yeh, all gone from around where I am, but the ground is still fairly wet, just getting showers pretty much every night tho, hot as through the day.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 3