I Bought an extra CB to make this mod on so we will see, Amazon stocks the parts should be here soon.
thanks for the help!
How do I turn down the power on my Cobra 29 ltd to 2 watts?
Discussion in 'CB Radio Forum' started by KingSparta, Apr 26, 2018.
Page 3 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Isn’t it a shame how someone steals someone elses idea, and then take credit for it? It seems to happen a lot especially when it comes to electronics.Last edited: May 1, 2018
-
Good deal. That’s the way to learn. Study, practice, and give it a shot. On hand experience is the best way to learn. Let us know how it goes. -
I just got finished with the: Cobra 29 LTD super modulation modification
It was easy after I figured out where to de-solder, Using Superwick Braid.
The jumper came out easily.
I bent the capacitors legs so they fit thru the holes, and bent over the legs on the other side.
I sniped off the extra wire, then took the resistor and cut off all but about 2/8s of an inch.
then I used my 60 watt solder pen and soldered both ends to the board.
put it back together and took it to my car.
I hooked it up with a watt meter and it was putting out 1 watt, swinging to about 4 watts.
hooked up my tiny linear amplifier (70 watts)
it worked as it did before putting out 50 watts swinging to 70 watts.
I also tested splatter, on the opposing channels, and there was none. -
Also I did not turn up pot VR4 or L14
So since it went well I modified one of my other radios (I have 3 Cobra 29 LTD's).Last edited: May 1, 2018
Slowmover1 Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 3 of 3