They used VERY LOW frequencies in fact much WW2 surplus was in the 100 - 1500 KHZ range. Your down flyer transmitters ran on 500KHZ.
The BC-348 receivers carried in bombers worked below 18MHZ and the navy ship board radios 2 common ones were the RBL ( 50 - 1500 khz ) and RBM ( 1500 - 18000 khz )
You can see in these photos Center in 1968 a BC-348 and in 1969 top left a RBM I used them as IF's on 14 mhz for my 2 meter stations.
LOW frequencies over water and VERY VERY low frequencies ( under 100khz ) under water is how you talk to a sub .......
How to Figure out your transmit range
Discussion in 'CB Radio Forum' started by Alby, Mar 12, 2010.
Page 4 of 6
-
Attached Files:
josh.c Thanks this. -
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Is there skip as in skywave that low in the spectrum? I had always assumed it was all surfacewave and directwave.:smt102:smt102
-
-
If the advantage of low freqs is distance, what is the disadvantage? -
No kidding a 1/4 wave antenna on 170 khz is almost 1/4 MILE tall.
Noise is VERY high but with any luck you can work very long distances.
There are few active stations however on the new 500KHZ experimental band the ARRL/FCC is working on that band as a ( MAYBE ) new ham band.
160 to 109 KHZ does not require a license. -
anyone know if amateurs in the UK still have 73 KHz for amateur use? -
(160 to 109 KHZ does not require a license.)
OOPS THAT SHOULD BE 160 to 190 KHZ -
Ouch... Yeah, I don't think a 1400/ft antenna on the back of my truck
would be such a hot idea.. lol My 102" Antenna is bad enough. -
squirrellsgnwild Thanks this.
-
102" Geeeez That must look strange..
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 6