I need some help with my CB install. (Pictures)

What? You mean that thing's not stainless? I never should have gotten rid of my SS Motorola 1/4 wave whip, darn.

 

Since this thread was about camper use, I saw one other solution: some guys have built antennas on top of the camper (dead center is best) that fold down for city driving, but you see the obvious disadvantage there. I even have friends with electric motors and gears on theirs in their pickups, because they're running tall fighting sticks.

"Uh, I'll be right back man, gotta go under a stoplight..."

 

SS is available, but most are chrome plated.

 

I still think you should have mounted that antenna on the top of the rack on the top back of your camper so you would get a full 360 degree send and receive.
That antenna will see everything especially that camper behind it now.
I think if you would have gotten a no ground plane antenna and put it on top and checked it with a good swr meter you could have tuned it to no higher than about 1.2 to 1 across the 40 freaks.
You should be ok now especially if you have a good swr now.
A good Astatic Mic with what you have should allow you to talk a reasonable distance.