installed trans but looks to be wrong transmission.
Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by Collie, Oct 13, 2019.
Page 4 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
FoolsErrand and Rideandrepair Thank this.
-
Rideandrepair, Collie and pushbroom Thank this.
-
Dino soar, Rideandrepair, speedyk and 4 others Thank this.
-
Dino soar, Rideandrepair and speedyk Thank this.
-
but anyhow, your comment is spot on brothaDino soar, Rideandrepair, magoo68 and 2 others Thank this. -
Just remember things come in 3’s and 7’s, so If you’ve hit 7 bad things you’ve got 7 good headed your way!!!
Just a tip, but if you had any trouble getting the input shaft through the new clutch. Pump the pedal a few times before you remove the wrong tranny. And if you have one. Put an angle gauge on the bottom of it before you pull it. Match the angle when you install the right one. It won’t take as long to switch in the right tranny!!! Good luck!!Dino soar, Rideandrepair and starmac Thank this. -
I loaned my truck out for a month once to an oo that needed some help, we are talking about an international with quite a bit of room and it even had swivel seats, just turn and stand up, when I got it back the shifter had been heated and bent. I was not a happy camper.Dino soar, Tx Countryboy, Rideandrepair and 2 others Thank this. -
Sounds like you’ve made good progress,despite setback,take your time,Be careful, watch that jack.
Dino soar Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 4 of 4