ISX 475: Leaking Head Gasket - To Inframe or Not Inframe
Discussion in 'Trucks [ Eighteen Wheelers ]' started by VisionLogistics, Jan 13, 2012.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Everytime u change an oil,drop 1.5 gallons of lucas in oil and u'll be ok. #### headgasket will run u 5000-6000 grand and you heavnt fix anything on the truck. Mine does the same thing and I got 06 475 ISX
-
-
When i was GETTING CURIOUS i went to ask all the shops..It was ''typical'' B/S.Rebuild it i was told.Then the numbers gave me a heart attack..15,000-25,000...In the end i was lucky and found this site and asked other people..These people were trying to RIP ME OFF with a whole bunch of B/S....
I am still running this old truck and it is very important i do not run it hot.So i book alot of light loads..I also found a good ''old school'' machanic that will rebuild my engine for 10,000-12,000....So get informed and talk around.And stay away from these RIP OFF ARTISTS called Machanics... -
-
Let it leak oil. We wash ours under the hood every month and it aint bad at all. Especiallly with your numbers, id drive it like it was stoled. Lool
-
I know someone with a similar engine issue. It's leaking oil from a few places including the rear cylinder head. About $6k to seal the engine or $12k to do an inframe. He's saving his pennies for the inframe. It will come with Cummins warranty and won't give problems for a very long time.
-
After all the work, including the rear structure re-seal during our transmission drop-n-swap last month, it's dry as a bone now. No leaks anywhere, and finally, no lake of oil under the truck when it leaves the truck stop.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2