Kenworth T600 won't crank after sugar found in the tank.

@jamespmack

 

Do you have CEL/SEL when you turn key on, no crank?

96 think its pannel above your head?

 

If I understand you correctly. It does turn over & you are using ether to fire it over it will run. It is not the fuse in the battery box. It is not staying primed it is not fuel going to the injectors. How did sugar get in the tank?

 

Well being sabotaged is a ruff guess what some monkey could have done. But my guess would be to change SRS, and TRS sensor.

Only other thought is the power cables l, small 12ga, harness running with starter cables. Has a square plug, about behind battery box, on its way to ecm. Check to make sure its clean.


New filters and primed? And you hooked lines back up correctly?

 

The tales & acts of an angry woman. Man of man or woman of woman

 

You need to unhook fuel lines at back of eng. or fuel filter with tank lines off tanks too and blow out all fuel that you can replace fuel filter and prime it then look to be sure clean fuel is getting to fuel filter?