Kevin Rutherfrauds $200000 Signature glider truck has complete engine failure!!!

The owners stopped taking it to PP. Last year I was in Saxon burg when they had the truck in the shop. Bruce took them into his office for a meeting.

Remember also that Jeff, the owner, took the truck to a few ECM tuners away from PP. To me, that let PP off the hook for any of the troubles. This all happened before the 50th mark.

 

I disagree.

PP and Rutherford are the ones taking money from the truck owner. That makes PP and Rutherford responsible in my eyes. They have a responsibility to choose and use good parts and vendors. I am sure there was a level of trust in PP and Rutherford's "expertise"., which IMO should extend to checking the engine out. If I buy a Dodge pickup and have engine trouble, I go to Dodge I don't go to Cummins.

If PP and Rutherford want to go back to DD, they can.

 

So a cylinder with leaking intake valves will end up with extreme heat and pressure? Care to elaborate on that interesting conjecture? It's pretty hard to generate pressure in a vented cylinder.

 

Like your other posts on this topic, you're batting 0.000.


https://www.facebook.com/TrackThatT...0.1427158553./660791583979906/?type=3&theater


https://www.facebook.com/TrackThatT...0.1427158570./658378400887891/?type=3&theater

 

I'm not familiar with detroits, but in that second picture there, there's what seem to be bands of some sort around the cylinder sleeves, what are those? And also does it not look like there's already evidence of rust on the cylinder sleeves? Was this engine ran before they tore it down, or did it come straight from Detroit's reman shop?

 

having trouble with logic.

PP puts hands on Detroit motor, Detroit should be more responsible..

other shops put hands on PP motor. PP should be off the hook.

is that right ?

 

O-ring grooves and crevice seal groove.

Here, everything you ever wanted to know about installing Detroit liners: https://ddcsn-ddc.freightliner.com/cps/rde/xbcr/ddcsn/23-60-03a.pdf

 

Lol... I'm not that unfamiliar. But where his hand is there's a orange and white looking band that's on all three that are visible in the picture, looks almost like the stretchy medical tape. That's what I was referring to.

Could it be just that? Tape on which to write which hole each came out of?

 

Garter belts... because someone was gonna get screwed.

 

It's still tucked in, 99% better then any OTR driver I've seen. Lame attempt on your post, move along.