Kw t660

Discussion in 'CB Radio Forum' started by csw1818, Dec 24, 2016.

  1. csw1818

    csw1818 Medium Load Member

    377
    139
    Feb 6, 2014
    pinehurst, nc
    0
    Anyone have a decent idea on where to setup the antenna? stock system has two firestiks on either mirror using a co-phased setup and would be pretty difficult to run my on coax and a ground strap. I got rid of those Wilson's...someone decided to spray paint them black... I put two firestiks up just to get me home.
     

    Attached Files:

  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. rabbiporkchop

    rabbiporkchop Road Train Member

    9,677
    6,526
    Feb 9, 2012
    Wapwallopen, Pa
    0
    [​IMG] I built a custom antenna for mine.
    Factory bracket was fine.
     
  4. csw1818

    csw1818 Medium Load Member

    377
    139
    Feb 6, 2014
    pinehurst, nc
    0
    I figured the bracket was fine. what did you do to run the coax just tape an end together?
     
  5. rabbiporkchop

    rabbiporkchop Road Train Member

    9,677
    6,526
    Feb 9, 2012
    Wapwallopen, Pa
    0
    Rubber boot on mirror arm slides back to reveal hole for cable..
     
  6. csw1818

    csw1818 Medium Load Member

    377
    139
    Feb 6, 2014
    pinehurst, nc
    0
    Good deal. I'll get the coax ran and find me an antenna after awhile. you run a 10meter in it?
     
  7. rabbiporkchop

    rabbiporkchop Road Train Member

    9,677
    6,526
    Feb 9, 2012
    Wapwallopen, Pa
    0
    I did. I drive for a different company now.
     
  8. csw1818

    csw1818 Medium Load Member

    377
    139
    Feb 6, 2014
    pinehurst, nc
    0
    Sounds good I'll get it all ran here soon. still have to plug up my inverter
     
  9. csw1818

    csw1818 Medium Load Member

    377
    139
    Feb 6, 2014
    pinehurst, nc
    0
    I didn't realize you had to take half the truck apart just to get the dang coax in.
     
  10. Bout Z

    Bout Z Light Load Member

    275
    1,149
    Mar 14, 2015
    so. ohio
    0
    Rabbi, I ran across some antennas that were similar to the ones you make, while browsin ebay this past weekend.
    Hustler hq-27 Made in the USA. Available in 48" 55" and 61"
    they were in the $25-$35 range.
    Some research revealed they were a popular style mobile back in the 70's and 80's. It appears hustler producing them again... in case anyone is interested.
     
    rabbiporkchop Thanks this.
  11. rabbiporkchop

    rabbiporkchop Road Train Member

    9,677
    6,526
    Feb 9, 2012
    Wapwallopen, Pa
    0
    Mine looks similar but they weigh ten times as much and use 6-gauge copper wire and you can run lots of power through them. The Hustler ones are excellent antennas but you can't run much power through them
     
    Bout Z Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.