I am looking for a step deck that is around 10000/11000 pound. Can you advise as to the best trailer to buy at or around this weight. My Tractor is 23300. Im considering a 53 foot step and am a bit concerned as I have a 280 WB with big sleeper, do you think this is practical. Thank you.
Looking for a light step deck
Discussion in 'Flatbed Trucking Forum' started by scania143, Jun 29, 2013.
Page 1 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
look at the new fontain its really light but not cheap. chapparel also makes a lite step. bensons are heavy.
I have a 320" wheel base 379 140" sleeper 51' step w/quikdraw tarp can scale 44000 lbs. are 230" co trucks w/53' steps scale 45500 they have quikdraw tarp sys also. -
we run a 2006 fontaine infinty SX. 48' combo with outside aluminum wheels, two rear boxes, and a lumber cage up front between the frame rails. also have two fabricated aluminum load levelers and the trailer weight 10,700.
-
I run fontaine 48' infinity combo also and it weighs in at 10,400 before we put 4 boxes on it. Great trailer
-
You don't have any problems with overall lenght like with Florida? Actually half dozen states have lenght restrictions if your trailer is over 48' but florida is $400 serious.
-
Our 53' Mac is about 12000 with loaded boxes.
-
There are now steps in the 8600 range. Fontaine revolution is around that, and I think Wilsons are now too. Most aluminum steps are around the 9500 range.
-
In a 53'?......
-
Wilson is a nice wagon, don't like the super single tires tho. A flat and your waiting for a tire truck.
-
Saddletramp,your fear off singles is pointless.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 2