Maxx Force 10 won't start no codes

Discussion in 'Trucks [ Eighteen Wheelers ]' started by Matney, Sep 19, 2019.

  1. Matney

    Matney Bobtail Member

    1
    0
    Sep 19, 2019
    0
    Okay guys racking my brain on this one. I have a Maxx Force that won't start and has no codes. i suspect it may be a bad injector already a lot of money into this and hate to go to the shop with it, can I do a pressure test(air test) on the injectors with taking it to a shop and hooking it up on a machine?
     
    Last edited: Sep 19, 2019
  2. Heavyd

    Heavyd Road Train Member

    6,655
    4,486
    Feb 4, 2009
    0
    If you have a 2007 emissions model engine, you can have fuel problems that will cause a no start and also not log codes. You can check for fuel pressure while cranking at the compucheck fitting at the fuel filter housing. Should have about 10-20 psi to start. Any pressure problems or other electrical problems with the injectors will cause a code.
     
  • Draft saved Draft deleted