Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

moving inverter between trucks

Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by driverdug73, Jan 25, 2012.

  1. Jan 25, 2012 #1
    driverdug73

    driverdug73 Bobtail Member

    13
    8
    Jun 18, 2011
    Fulton Mo
    0
    Does anyone know of a good way to transfer a inverter from one truck to another? I move between divisions once a year and would like to transfer my inverter with me. I'll have the shop install it, a 1500 watt cobra, but would like a simple way to move back and forth. Ideas? Thanks.
     
    driverdug73, Jan 25, 2012
    driverdug73, Jan 25, 2012
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jan 26, 2012 #2
    Omniscient

    Omniscient Light Load Member

    139
    31
    Jun 9, 2011
    The lost Highway
    0
    Well I just mount mine in the side box. Drill 2 holes into the bottom with grommets and run the positive and negative through to the batteries. Then put caulk around the grommets to seal it off. Then again that only helps if you can get wires leading into the sleeper.
     
    Omniscient, Jan 26, 2012
    Omniscient, Jan 26, 2012
    #2
  4. Jan 26, 2012 #3
    Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,216
    Sep 23, 2007
    Statesville, NC
    0
    If it is a company truck their shop would have to do the work. This covers you in case the inverter is not connected correctly and it burns down the cab.

    Thanks,
    Mark
     
    Mark Kling, Jan 26, 2012
    Mark Kling, Jan 26, 2012
    #3
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.