Muck Boots 'n' Slickers - Life of a Livestock Hauler
Discussion in 'Experienced Truckers' Advice' started by Cattleman84, Jun 14, 2021.
Page 1036 of 1041
-
exhausted379, 1951 ford, JolliRoger and 12 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I would also like to point out a truck built cuz you wanted one that isn’t worked like a rented mule is very different from a truck you very much like and enjoy yet you need it dependable and it has to make sense
exhausted379, 1951 ford, JolliRoger and 13 others Thank this. -
exhausted379, 1951 ford, JolliRoger and 10 others Thank this.
-
I think everyone needs to have owned at least one truck that gives you wood.
exhausted379, 1951 ford, JolliRoger and 11 others Thank this. -
After all the ### eatons trucks have caused me today I’m sick if all of em. Cheap ### grain means cheap ### grain rates and I get all that. I get I’m slow as can be getting one back together but whoo they been hard on my feelings from all directions today
jcatel, exhausted379, 1951 ford and 11 others Thank this. -
The best part i like is when someone that thinks they know something pulls you over. Starts something like this, nice day officer, whats up. They say, do you not know you cant f'n be moving that during rush hour traffic. Come back line is, you tell me where you want me to hold the dumb end of the tape and you measure the width. No moves over 12' is the rule. He or she looks at tape and does a double take because its 11'10". Then i ask what they came up with.. they mumble something, and thats when i say the wagon is 9' wide and move on my merry way
exhausted379, 1951 ford, JolliRoger and 11 others Thank this. -
Alright boys I need some assistance. My turbo oil feed line, the pressure side is weeping oil somewhere. I put in new gaskets and o rings on the pressure side and drain side and still weeping oil, so my guess is oil feed line. Does anyone know the part number for this part and does anyone make a braided steel line instead of the rigid one? Here is the engine plate.
Dale thompson, High Stepper, 1951 ford and 6 others Thank this. -
Dale thompson, 1951 ford, Feedman and 3 others Thank this.
-
What i come up with is Cat part steel line, 2 options:
straight at filter head 9n3258
90 degree at filter head 9n3256Dale thompson, 1951 ford, Feedman and 3 others Thank this. -
Dale thompson, exhausted379, 1951 ford and 7 others Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1036 of 1041