MXS C-15 Oil Pressure and Temperture

Once again .
Caterpillar E model, single turbo c15 and all Accert engines don't have a oil temp sensor on the factory cat engine harness.
If your engine does have a sensor in the pan to read oil temp then that's a oem installed unit that was installed at the factory, nothing to do with caterpillar. So it also has no communication with engine ECM only the dash Guage.

 

ECM just adds 10 ° to water temp that's all it does with oil Temp. Yes no sensor for Acert for sure.

 

Did you found the solution ???

 

p.[/QUOTE]

I have similar problem oil psi changes with. RPM and Temp and load on engine
At idle 40 psi with cold oil stays same until 180° after 180 1200rpm 40psi and 1300 RPM 40psi 1500-1600rpm =60 psi
But C15 Acert mxs RUNS great for me with bully dog tuner

 

I guess

I guess it just adds 20°f to water temp , I tried with 2% load and full load no difference
190° f water temp
210° f oil temp