My cb has an swr meter but no calibrate option?

pins 7,8,9 if I remember, this stuff is really small, have to be careful, if you dont know then , correct answer dont stick hot objects in there,

 

The radio is 35-40 years old...and you are just now figuring out the meter is for "power" and not SWR?

 

I have repaired a few that have had solder blobs shorting out the board or someone pulled the wrong parts completely.

 

To link the antenna and the CB with the SWR meter. First, attach the antenna cable's end to the SWR meter's input. The antenna input on the rear of the radio should then receive the cable from the SWR meter.

 

The optimum signal quality may be ensured by calibrating a CB radio, which will be covered in this article. Setting up an SWR meter is the first step in accomplishing this.

 

What Galaxy 959B do you have that AutoCalibrates? I have two of them, and neither auto calibrate that Im aware of.