my clutch breaclutch brake cut in and out

Discussion in 'Kenworth Forum' started by jkeeler, Feb 2, 2013.

  1. jkeeler

    jkeeler Bobtail Member

    4
    0
    Feb 2, 2013
    0
    Ok so my clutch break stopped working properly for A few days hard to Get into gear etc then All of a sudden it was working fine... caught me as strange anyone have any sugestions how this would Be possible
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. jkeeler

    jkeeler Bobtail Member

    4
    0
    Feb 2, 2013
    0
    Ok so my clutch break stopped working properly for A few days hard to Get into gear etc then All of a sudden it was working fine... caught me as strange anyone have any sugestions how this would Be possible
     
  4. manasteel

    manasteel Light Load Member

    124
    32
    Sep 10, 2012
    0
    your clutch is breaking apart, the broken pieces get caught between the disks, and the clutch will not release so the brake will not stop the input shaft. when the pieces fall from between the disks, the clutch brake works normally
     
  5. Smellfunny

    Smellfunny Road Train Member

    1,445
    967
    Jan 28, 2012
    South Carolina
    0
    In other words it is time for a clutch. Now. Before you get in trouble when it does not work at all.

    If you look in the hole where you can see clutch there will probably be metal flakes or dust and if (with the engine off) you feel in there you might fine some broke spring pieces or just small pieces of metal.
     
  6. jkeeler

    jkeeler Bobtail Member

    4
    0
    Feb 2, 2013
    0
    Ya i looked in there and felt like thick oil and possible shavings
     
  7. jkeeler

    jkeeler Bobtail Member

    4
    0
    Feb 2, 2013
    0
    Eather chunks of dirty or shavings... this is a offroad floater
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.