N14 Celect ECM parameters

Discussion in 'Trucks [ Eighteen Wheelers ]' started by xsetra, Oct 4, 2022.

  1. xsetra

    xsetra Road Train Member

    4,583
    5,778
    Aug 21, 2011
    0
    I purchased an ECM cpl: 2025 for my truck. My old ECM cpl: 2592
    One thing I noticed is the engine fan runs all the time with the new ECM.

    Where can I find a list of parameters that are programmable in a N14 ECM.

    Thanks for any information.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. ProfessionalNoticer

    ProfessionalNoticer Road Train Member

    2,942
    7,794
    Apr 25, 2021
    0
    Don't you have to plug in and use Insite?
     
    xsetra Thanks this.
  4. Goodysnap

    Goodysnap Road Train Member

    3,055
    7,144
    Jul 12, 2017
    0
    All you need is Insite. Create a template from your old ECM and send it to the new one. This will transfer all your settings and parameters to the new/ used ECM. You will need a bypass harness or you’ll have to swap the ECMs again to make it happen.

    You should also make sure the engine calibration is the same.
     
    spsauerland, Magoo1968 and xsetra Thank this.
  5. xsetra

    xsetra Road Train Member

    4,583
    5,778
    Aug 21, 2011
    0
    The shop that sold me the ECM will program and change parameters for me. I am trying to find a list to prepare myself for what changes I might want.
     
    ProfessionalNoticer Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted