Np I was shown it by a DOT Officer that took me there to sit out a shut down. He pulled me over for speeding but I failed to have my log up to date so I got nabbed. But the speed he said I was doing was no possible with the truck I was driving. And I use to stop there when I could since.
NC I77 N scale detour at the Virginia state line.
Discussion in 'Experienced Truckers' Advice' started by crabcracker, Oct 28, 2013.
Page 2 of 4
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Also stop[ and get you a pocket Truckstop book, cost around 5.00 and it will list all truck stops which will list their services. Best investment you can get. If you had that you could seen Brindles Truck stop listed.
puncher and crabcracker Thank this. -
Always better to weigh, but use to be legal to run US-52 north up old Fancy Gap but was illegal going south (down), not sure if that's still the case.
crabcracker Thanks this. -
Just FYI, North Carolina allows a max of 36K on a set of tandem axles. Seldom a need to try to dodge a scale.
crabcracker Thanks this. -
If North bound, they are below the Freeway level. Easy to miss.
-
Used to be , but I think it's been changed , you can't go up the mtn. now at least not in a big truck...anything over 12k GWVpuncher Thanks this.
-
It still is as far as I know.....
There is a Loves up there off 77 too....exit 99? or somewhere about that area...puncher Thanks this. -
Loves is past scale goin north&52 totally restricted now--both ways
puncher Thanks this. -
I just went by brintles this morning I didnt see anything about a flying j ? I think you are confused
-
You can still go up old road but its a hard,pull two lane.there is away around but 6.5ton per axle,so if grossing 80k break out the check book,they do watch the way around during the day.there is another way around but if you get caught,you WILL be taken to scale for full inspection.
puncher Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 4